As an Amazon Associate I earn from qualifying purchases.
PHANTEKS THERMAL SOLUTIONS #ad - Rubber pads included to support graphics card weight to prevent GPU sag. Compatible with 1-slot, 2-slot, 3-slot and 4-slot graphics cards. 7 pci slot atx chassis required. Pci-e gen4 x16 riser cable included with Dual layer induvial shielded cables.
Phanteks #ad - Easy installation, placing tray over all seven PCI slot spaces. Included 220mm riser cable. Pci slot required: 7. Supports pcie3. 0/2. 0/1. 0, doesn't support PCIE 4. 0 Compatible with chassis with “open” PCI slot design.
Phanteks #ad - Compatible with the Enthoo 719 for dual system setup. Flexible slim form factor allows for easier installation and orientation. Individual laneway shielding to prevent external EMI/EFI and interference between channels.
Cooler Master #ad - Modular, instantly adjustable design: the position of the GPU can move back and forth to allow cables to pass through chassis with either closed or open PCI slots.
Cooler master riser cable version 2 included: A high quality Cooler Master version 2 riser cable completes the vertical GPU holder package. Durable, high quality materials: thick SGCC steel prevents the largest and heaviest GPUs from bending the GPU holder.
EZDIY-FAB #ad - Vertically display a gpu graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler. Vertical gpu bracket with rgb led effects, b, mystic, g, fusion:support m/b 3 pin rgb header 5v, Please note : Not Support 4pin RGB header +12V, g, D, synchronizable RGB lighting via motherboard AURA, R, 12 volts can destroy LED.
Only supports PCIE 3. 0 Note: please check your case with enough space.
Lian Li #ad - Expansion Slot: 4. Not compatible with rtx 3080/3090 and PCIE 4. 0 Material: SECC. Vertical gpu kit for PC-O11D dynamic. Pci-e cable length: 200mm. Not fit pc-o11d rog or o11DXL.
EZDIY-FAB #ad - Designed for most white atx case with at least 7 PCIE slots in the market, White metal bracket perfectly fit White case. Please refer to length spec image and confirm that there is enough space inside the chassis.
Vertically display a gpu graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape.
Lian Li #ad - Not" compatible with rtx 3xxx series and AMD 5800/5900 Not" compatible with pcIE 4. 0 vga cards. Allows you display graphics cards while still having room for 2x120mm Fans.
EZDIY-FAB #ad - The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud. The latest riser cable connects the graphics card to the PCIe slot of the motherboard, a flexible TPE flat cable with a length of 200 mm.
Note:before buying, please confirm whether there is enough space inside the chassis to install. Only support PCIE3.
1. PHANTEKS THERMAL SOLUTIONS
#ad220mm Flat Line PCI-E Gen4 x16 Riser Cable Kit, Phanteks PH-VGPUKT4.0_03 Gen4 Vertical GPU Bracket
#adMore information #ad
Premium and durable cable design supporting full Gen4 speeds. Can be directly installed without modding in the Phanteks Eclipse P300A/P360A/P400A chassis. Vertical mounting system for any graphics card.| Brand | PHANTEKS THERMAL SOLUTIONS #ad |
| Manufacturer | Phanteks #ad |
| Part Number | PH-VGPUKT4.0_03 |
| Model | PH-VGPUKT4.0_03 |
| Warranty | 1 year manufacturer |
More information #ad
2. Phanteks
#adPhanteks PH-VGPUKT_02 – Universal Vertical GPU Bracket with 220mm Flat Line Pci-E X16 Riser Cable Kit
#adMore information #ad
Vertically display a VGA Graphics card. Gpu support: Dual Slot GPU. Mudding might be required. Must change pci-e slot setting in bios to gen3/pci-e 3. 0 before installing the GPU to work with Gen4 / PCI-E 4. 0 gpus.| Brand | Phanteks #ad |
| Manufacturer | Phanteks #ad |
| Height | 6.5 Inches |
| Length | 9.5 Inches |
| Weight | 0.95 Pounds |
| Width | 6.5 Inches |
| Part Number | PH-VGPUKT_02 |
| Model | PH-VGPUKT_02 |
| Warranty | 2 year manufacturer |
More information #ad
3. Phanteks
#adCable 90 Degree Adapter for Enthoo 719, Phanteks PH-CBRS_FL15 150mm Flat Line PCI-E x16 Riser
#adMore information #ad
Gold-plated connectors for super conductive capacity and lossless signals. High-quality soldered contacts for signal integrity and better signal.| Brand | Phanteks #ad |
| Manufacturer | Phanteks #ad |
| Height | 1 Inches |
| Length | 11 Inches |
| Width | 8 Inches |
| Part Number | PH-CBRS_FL15 |
| Model | PH-CBRS_FL15 |
| Warranty | 2 year manufacturer |
More information #ad
4. Cooler Master
#adCooler Master Master Accessory Vertical Graphics Card Holder Kit Version 2 with Premium Riser Cable PCI-E 3.0 x16-165mm, Compatible with All Standard ATX Chassis MCA-U000R-KFVK01
#adCooler master riser cable version 2 included: A high quality Cooler Master version 2 riser cable completes the vertical GPU holder package. Durable, high quality materials: thick SGCC steel prevents the largest and heaviest GPUs from bending the GPU holder.
More information #ad
Compatible with all standard atx chassis: The newly revised vertical graphics card holder kit fits all standard ATX chassis with at least 7 available PCI slots. Showcase your graphics card: the vertical graphics card holder Kit allows vertical installation of a GPU to better show off the visual design of the GPU and its cooler.| Brand | Cooler Master #ad |
| Manufacturer | Coolermaster #ad |
| Height | 4.76 Inches |
| Length | 7.24 Inches |
| Weight | 1.26 Pounds |
| Width | 5.59 Inches |
| Part Number | MCA-U000R-KFVK01 |
| Model | MCA-U000R-KFVK01 |
| Warranty | 1 Year |
More information #ad
5. EZDIY-FAB
#adEZDIY-FAB Vertical Graphics Card Holder Bracket with ARGB 5V 3Pin LED,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- White
#adOnly supports PCIE 3. 0 Note: please check your case with enough space.
More information #ad
The 20cm/7. 8in pcie riser with high quality tpe cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance. Designed for most white atx case with at least 7 PCIE slots in the market, White color metal vertical mount fits white case perfectly. With movable bracket, more flexible in using PC case interior space.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | JP-RGB GPU Bracket-B-with new riser |
| Model | YIHPI332-1 |
More information #ad
6. Lian Li
#adLian Li O11D-1X Vertical GPU Bracket KIT PCI-E 3.0 for O11 Dynamic Only NOT Compatible with PCI-E 4.0 VGA Card
#adMore information #ad
| Brand | Lian Li #ad |
| Manufacturer | Alian Lian 19661708715 #ad |
| Height | 14 Inches |
| Length | 1.5 Inches |
| Weight | 0.51 Pounds |
| Width | 6.9 Inches |
| Part Number | O11D-1X |
| Model | O11D-1X |
| Warranty | 1 Year |
More information #ad
7. EZDIY-FAB
#adEZDIY-FAB Vertical Graphics Card Holder Bracket,GPU Mount,Video Card VGA Support Kit with 20cm/7.8in PCIE 3.0 Riser Cable- White
#adVertically display a gpu graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape.
More information #ad
Only supports PCIE 3. 0 High quality material increases structural toughness and supports the large graphics card weight on the market. Pcie riser with high quality tpe cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | US-GPU Vertical holder-W with new riser |
| Model | US-GPU Vertical holder-W with new riser |
More information #ad
8. Lian Li
#adLIAN LI LAN2-1X Premium PCI-E x16 3.0 Black Extender Riser Cable 200mm and Covert Bracket for LANCOOL 2 for PCIE 3.0 only NOT Compatible with PCIE 4.0 VGA Cards
#adMore information #ad
Included pci-e riser cable 200mm, allows you to mount a PCI-E 16X Card. Vertical graphics card holder for LANCOOL II with PCI-E Riser Cable 200mm.| Brand | Lian Li #ad |
| Manufacturer | LIAN LI #ad |
| Height | 6 Inches |
| Length | 7.5 Inches |
| Weight | 0 Pounds |
| Width | 5 Inches |
| Part Number | LAN2-1X |
| Model | LAN2-1X |
| Warranty | 1 year |
More information #ad
9. EZDIY-FAB
#adEZDIY-FAB Vertical Graphics Card Holder Bracket Support with Multi-Angle,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- White
#adNote:before buying, please confirm whether there is enough space inside the chassis to install. Only support PCIE3.
More information #ad
0 The adjustable gpu bracket allows to show off their GPUs and enhance cooling efficiency by mounting it vertically, or at an angle between 0 and 45 degrees, on the PSU shroud. White color metal vertical mount fits white case perfectly. For long or heavier graphics cards, please adjust to an appropriate angle to avoid falling.| Brand | EZDIY-FAB #ad |
| Manufacturer | EZDIY-FAB #ad |
| Part Number | JP-Muti-VGA stand-W with new riser |
| Model | JP-Muti-VGA stand-W with new riser |
More information #ad
30-90% Disocunts Found!
We found that some of the products on this list are now discounted on Amazon! Do you want to see these products?
Disclaimer: We earn small fee from purchases made on Amazon.
