As an Amazon Associate I earn from qualifying purchases.

Package include 2x replacement joysticks; 1x "Y" Tri-wing Screwdriver; 1x "+" Cross Screwdriver; 4x Thumbstick caps; 1x Tweezers.
Please don't forget to calibrate the joystick by using N-switch setting after installation if it drifts. Perfect solution to bring your controller back to life! High quality accessories for joycon repair replacement - Made of high quality material of plastic and metal, and the ribbon cable fits well.




Our shop always strives for customer satisfaction and always does our best to meet customer needs with better quality. Geekshare original design -- cute cat paw theme thumb grip caps, exquisite color matching, adds funny and vitality into your Switch and Switch Lite, make it more eye-catching.
Soft and comfortable touch -- made of soft silicone material, which can protect the analog sticks from scratches and dirt, and it is very comfortable to touch! Easy to install -- ① turn over the joystick caps. Please note: check if the caps wrap the joystick completely to prevent them from pop off when you playing. Fall the caps.

Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. Some reported it is also used in 8Bitdo SNES controllers. When to replace – the analog joystick needs to be replaced when your controller has the problem of drifting, a dead spot, a dead zone, a blind spot, stuttering, creeping, no reaction when clicking, or it wouldn't center after years of wear and tear.
Calibrating in controller settings might not work. Compatibility – this version of analog stick comes in dark gray bottom plate with two plastic sticks inserting in the PCB. The oem genuine repair parts ensure accuracy and prolong lifespan. It locks in 3 directions when not sit in controller cover. We packed 10x correction resistors to solve the potential problem in hardware level. Even new sensors cannot be 100% balanced.

Professional installation skill is required to teardown the Quest 2 controller and replace the joystick.
Easy to install: with full professional repair kits, It is easy to repair your broken, worn-out or insensitive analog joystick. Can bring your analog joystick back to life. Tips:not compatible with Oculus Quest 1.
1. Rzkipdy
#ad
Thumb Grip Caps, Joystick Replacement for Switch Lite – 19 in 1 OEM Analog Stick Thumbstick Parts Repair Tool Kit Accessories with Y00 Triwing Screwdriver, Tweezers for JoyCon Joy Con Controller
#adRzkipdy #ad - Money saver - original joysticks to repair your broken or drifting analog, everybody is able to save a new console or controller in 10 minutes or less. Easy installation - comes with everything you need to take apart the console or JoyCon controller easily, you’d better check out any of the Youtube videos on 'how to', then disassemble your controller and screw snap in the new precise replacement analog stick.More information #ad
Oem flawless performance joysticks - Exactly the same as the joysticks that comes on your console or controller, perfectly fit for your device.Brand | Rzkipdy #ad |
Manufacturer | Rzkipdy #ad |
More information #ad
2. Oussirro
#ad
Oussirro 2-Pack 3D Joycon Joystick Replacement, Analog Thumb Stick Repair Kit for N-Switch Joy Con Controller, Including Cross Screwdriver Tool + 4 Thumbstick Caps
#adOussirro #ad - Easy operation for diy - description under below will tell you the detailed operation steps, and you can also follow some Youtube vidoes, it is very easy. Easy to install, the joystick replacement is durable and lightweight, even for newcomers. Package included - this repair kit is the basic but essential accessories for joystick replacement, without any other much unneccsories tool at more cost.Package include 2x replacement joysticks; 1x "Y" Tri-wing Screwdriver; 1x "+" Cross Screwdriver; 4x Thumbstick caps; 1x Tweezers.
More information #ad
Please note- we are endeavour to provide first class services and products, if parcel arrived broken&missing parts&items not working well, please contact us we would arrange refund&replacement. Perfect replacement rather than buy a new switch joycon controller - this N-Switch Joy Con joystick replacement repair tool kit works for Left or Right joycon joystick, worn- out, replaces your broken, insensitive or drift analog joystick. Please don't forget to calibrate the joystick by using N-switch setting after installation if it drifts. Perfect solution to bring your controller back to life! High quality accessories for joycon repair replacement - Made of high quality material of plastic and metal, and the ribbon cable fits well.
Brand | Oussirro #ad |
Manufacturer | Oussirro #ad |
Height | 0.91 Inches |
Length | 5.83 Inches |
Width | 2.28 Inches |
More information #ad
3. Ferkurn
#ad
Switch Lite Joy con Grip Button Stick Cover Switch Joystick Grip Cap Replacement Part 3D Analog Cap Joy-con Controller Repair Kit Accessories, Ferkurn Switch Joycon Thumb Grip Joystick Replacement Cap
#adFerkurn #ad - Multiple choices: a variety of colors are designed for players to choose and match. Comprehensive protection: prevent your joystick from scratches, collisions, and dirt.More information #ad
Special design: perfect match with Switch & Switch Lite Joy-con controller joystick. Unique function: specially used to REPLACE the original joycon cap of switch. High-quality materials: soft and comfortable, bring a better gaming experience.Brand | Ferkurn #ad |
Manufacturer | Ferkurn #ad |
Height | 0.39 Inches |
Length | 1.97 Inches |
Width | 1.97 Inches |
Part Number | NS-9pcs-Re-Yellow |
Model | NS-9pcs-Re-Yellow |
More information #ad
4. Ferkurn
#ad
Joycon Grip Button Stick Cover Controller 3D Analog Skin Replacement Part Repair Kit Accessories, Ferkurn Joystick Replacement Cap Thumb Grip Compatible with Switch Joy-con Switch OLED& Switch Lite
#adFerkurn #ad - Remember the original skin can be take off and DIY the color. 8 pcs: 8 pcs caps is for repairing the orginal cover. Easiest way for repalcement, It will be very easy to install and get no fussy. But the origin one may difficult to re-install.More information #ad
Brand | Ferkurn #ad |
Manufacturer | Ferkurn #ad |
Height | 1.97 Inches |
Length | 1.97 Inches |
Weight | 0.02 Pounds |
Width | 0.39 Inches |
Part Number | Re-Caps-Yellow |
Model | Re-Caps-Yellow |
More information #ad
5. Rowsmau
#ad
Thumb Stick Grips Cap Cover Joystick Grip Caps Replacement for Switch NS Controller Joy-Con B
#adRowsmau #ad - Applicable model :Switch NS. Color:B. Products include : 2Pcs *Thumb Grip Caps. Most repair parts are only suitable for special model. Please confirm this item is the right model you need before placing order. Nice pattern, add comfort to gameplay and keep fingers from slipping.More information #ad
Brand | Rowsmau #ad |
Manufacturer | guanximaoyi #ad |
Part Number | 88 |
More information #ad
6. GeekShare
#ad
GeekShare 4PCS Silicone Cat Paw JoyCon Thumb Grip Set Joystick Caps Compatible with Switch / OLED / Switch Lite Pink Blue
#adGeekShare #ad - Compatible with switch/lite/oled -- not for ps4, switch Pro or Xbox One Controller. Align on the joystick. Quality/warranty -- if you find any problems damage, dirt, etc. Scratches, please feel free to contact us.Our shop always strives for customer satisfaction and always does our best to meet customer needs with better quality. Geekshare original design -- cute cat paw theme thumb grip caps, exquisite color matching, adds funny and vitality into your Switch and Switch Lite, make it more eye-catching.
More information #ad
Switch /lite and other accessories are NOT included. Soft and comfortable touch -- made of soft silicone material, which can protect the analog sticks from scratches and dirt, and it is very comfortable to touch! Easy to install -- ① turn over the joystick caps. Please note: check if the caps wrap the joystick completely to prevent them from pop off when you playing. Fall the caps.
Brand | GeekShare #ad |
Manufacturer | GeekShare #ad |
Part Number | Geekshare-Thumb Grip Stick-01 |
More information #ad
7. ElecGear
#ad
Analog Stick Controller Sensor Assembly Thumbstick Module, ElecGear 4X Replacement Joystick EL3 ALPS Compatible with Nintendo Switch Pro and PS3 Wireless Controller
#adElecGear #ad - It will help correct 3 to 5 degrees drifting. The trim pot resistors can be in green or black. Professional repair with a heat gun is suggested. The thumbstick module was made by ALPS. You can simply replace the side potentiometer sensor alone to solve most of the joystick problems.Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. Some reported it is also used in 8Bitdo SNES controllers. When to replace – the analog joystick needs to be replaced when your controller has the problem of drifting, a dead spot, a dead zone, a blind spot, stuttering, creeping, no reaction when clicking, or it wouldn't center after years of wear and tear.
More information #ad
Reminder of operation – with as many as 14 prongs, de-soldering and soldering the whole module takes serious skills. Calibrating in controller settings might not work. Compatibility – this version of analog stick comes in dark gray bottom plate with two plastic sticks inserting in the PCB. The oem genuine repair parts ensure accuracy and prolong lifespan. It locks in 3 directions when not sit in controller cover. We packed 10x correction resistors to solve the potential problem in hardware level. Even new sensors cannot be 100% balanced.
Brand | ElecGear #ad |
Manufacturer | ElecGear #ad |
Part Number | EL3-NS-Pro |
Model | EL3-NS-Pro |
More information #ad
8. Gorliskl
#ad
Gorliskl 2pcs Replacement Thumb Stick Analog Joystick for Oculus Quest 2 Controller, VR Replacement Joystick Analog Thumb Stick Repair Kit for Oculus Quest 2 Accessories
#adGorliskl #ad - You will get:2x analog joystick replacement for oculus Quest 2 Controller, 1 x tweezer, 2 x screwdriver, 1 x pry tool, 8 x Thumb Stick Caps, 1 x triangle paddle. Compatible with:the joystick repair kit works for Oculus Quest 2 Controller left/right joystick, perfect fit with your controllers directly.Professional installation skill is required to teardown the Quest 2 controller and replace the joystick.
More information #ad
You can watch some tutorial video on YouTube. Any questions, please contact us first, we will try our best to help you. Perfect repair:a economical way to repair your drift joystick, make it look like the new one,No longer need to spent more money on a new VR controller. Easy to install: with full professional repair kits, It is easy to repair your broken, worn-out or insensitive analog joystick. Can bring your analog joystick back to life. Tips:not compatible with Oculus Quest 1.
Brand | Gorliskl #ad |
Manufacturer | Gorliskl #ad |
Part Number | sb-41 |
Warranty | NO |
More information #ad