As an Amazon Associate I earn from qualifying purchases.

1. Fancasee


Fancasee 4-Pin PWM Fan Power Supply Cable 1 to 5 Splitter 5 Way PC Case Internal Motherboard Fan Power Extension Cable Cord Wire for ATX Computer Case 4-Pin and 3-Pin Cooling Fans 13 inch, Black

Fancasee #ad - The extension cable offers greater flexibility between motherboard and CPU cooling fans. Widely compatible: support 4-pin and 3-pin fans cable, the 1 to 5 splitter 5 way fan power extension cable compatible with 4-pin and 3-pin PC case motherboard fans. Black sleeved nylon braided cable, more durable and make the internal of pc case looks more clean & tidy. Excellent 1 to 5 splitter 5 way 4-pin PWM fan power supply extension cable cord, better power supply for PC computer case internal motherboard fans. Plug-n-play, easy to plug; 5 way 4-pin male connector jack fan hub cable.
BrandFancasee #ad
ManufacturerFancasee #ad
Height0.79 Inches
Length3.94 Inches
Weight0.04 Pounds
Width1.97 Inches
Part NumberFA-FC-4P-03



DEEPCOOL FH-10 Integrated Fan Hub, Powering up to 10 Fans 3-pin Non-PWM or 4-pin PWM, Occupying only One 4-pin Motherboard Header

DEEP COOL #ad - Velcro and screw mountings applicable for the tower interiors. Powered by a stable sata connection to the system PSU for up to 10 fans. If 3-pin non-pwm fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. Capable of connecting to 10 PC fans simultaneously for cooling the computer system. Only speed of Fan 1 can be identified by the system. They will run at FULL SPEED. That is, all pwm fans will run at the same DUTY RATIO. If 4-pin pwm fans are connected to this fan hub, duty ratio of all pwm fans can be adjusted at the same time.
BrandDEEP COOL #ad
ManufacturerDEEP COOL #ad
Height1.18 Inches
Length8.39 Inches
Weight0.22 Pounds
Width4.41 Inches
Part NumberFH-10

3. Electop


Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller

Electop #ad - Designed for 12v 4-pin 3-pin fans, support simultaneous starting at most 10 channel fans. Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.

Please note 4pin fan speed can be adjusted by temperature control. For both 4-pin and 3-pin fans. 3pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting. If the chassis fan is configured in bios to run at 50%, the hub has a power source fed from the computer power supply, you will have 10 fans at 50%. Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces.

Red is expected to be a pass through for the cpu fan. In the hub interfaces, the red cpu interface is the cpu fan dedicated interface with speed detection function. The ten fans will spin at the same speed, that designated by the system for that fan. There is eva double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. You can connect to the CPU fan lead on the system board or the chassis fan lead. So, then the speed is regulated by the speed for the "source" fan.
BrandElectop #ad
ManufacturerElectop #ad
Part NumberCPUCOOL-1-10-4P



AC-2RGBC-B1, Magent/Velcro Mounting, Two RGB Lighting Channels, Powered by CAM V4 Software, Internal PC Lighting Controller, Three Digital Fan Channels, NZXT RGB & Fan Controller, Black

NZXT #ad - Powered by nzxt cam: nzxt cam application monitors and controls your build, enabling you to choose from presets or custom controls for your RGB lighting and fans to create your dream PC.

Lighting channels: two nzxt rgb lighting channels, up to 40 individually addressable LEDs per channel, 80 LEDs total. More rgb lighting accessories: mix and match any nzxt rgb led accessories within each channel, including NZXT Underglow, Cable Comb, LED strips in various lengths, and Aer RGB fans while syncing all lighting accessories across different channels. Fan channels: three fan channels with max 10W per channel output with built-in noise detection module. Lighting channels now support up to 40 LEDs per channel or six devices.
BrandNZXT #ad
ManufacturerNZXT #ad
Height1.53 Inches
Length6.53 Inches
Weight0.35 Pounds
Width2.75 Inches
Part NumberAC-2RGBC-B1
Warranty2 Years

5. Noctua


Noctua NA-FC1, 4-Pin PWM Fan Controller Black

Noctua #ad - Works as a manual speed reducer or in tandem with the automatic motherboard fan control: achieve truly quiet operation, even with high-speed PWM fans such as Noctua’s industrialPPC series. Includes a 3-way splitter cable for controlling up to 3 fans simultaneously. No stop” mode: prevents the fan from falling below a speed of 300rpm in order to avoid BIOS fan errors. Compact, highly flexible controller for 4-pin PWM fans. 6-year manufacturer’s warranty.
BrandNoctua #ad
ManufacturerNoctua #ad
Height0.98 Inches
Length1.89 Inches
Weight0.11 Pounds
Width0.83 Inches
Part NumberNA-FC1

6. Kingwin


And Fits 3.5 Inch Drive Bay. Easy Setup, and Easy Control of Your Cooling Fans, Kingwin FPX-001 Fan Controller 4 Channel w/ LED. Controls up to 4 Sets of PC Computer Fans, Independent Turn Knob Control

Kingwin #ad - Model: fpx-001. Led indicator for Power On/Off. 3 pin fan Connections. Control 4 Sets of Fans. Fit 3. 5-inch Bay.
BrandKingwin #ad
ManufacturerKingWin #ad
Height1 Inches
Length3.68 Inches
Width4 Inches
Part NumberFPX-001



DeepCool Fan Hub Control 4PWM Fan Speed Supports Fan with 3Pin/4Pin Cooling FH-04

DEEP COOL #ad - 4-port fan hub. Compatible with 3-pin/4-pin fans. Support PWM function. Support Cable management. Double-sided adhesive Installation.
BrandDEEP COOL #ad
ManufacturerDeepcool #ad
Height3.4 Inches
Length2.5 Inches
Weight5.19 Kilograms
Width1 Inches
Part NumberFH-04
Warranty1 Year

8. AC Infinity


MULTIFAN, for AV Cabinet Cooling, USB Fans and Devices, Fan Thermostat and Speed Controller, Controls AIRPLATE, AC Infinity Controller 2

AC Infinity #ad - Features an alarm system, two buffer options, six fan speeds, display lock, and power failure memory. Controls up to six ac infinity Cabinet and USB Fans, see below for compatibility. Automated programming that self-adjusts cooling power in response to changing temperatures. Intelligent thermal fan controller with on-board processor and digital LCD display. Complete kit includes precision thermal probe, mounting screws, and power wall adapter.
BrandAC Infinity #ad
ManufacturerAC Infinity #ad
Height2.75 Inches
Length4.25 Inches
Weight0.4 Pounds
Width1 Inches
Part NumberAI-ATC

9. AeroCool


AeroCool Touch-E Fan and Temperature Controller Cooltouch-E

AeroCool #ad - 7 led backlight colors selection or turn off backlight completely. Support up to 20W per channel. 7 led backlight colors selection or turn off backlight completely. 3 speed setting - Low/Mid/High. Power on/off for each individual channel. Power on/off for each individual channel. Innovative "Touch" LCD technology. Fan working display. Controls 4 sets of fan speed individually. Support up to 20W per channel. Controls 4 sets of fan speed individually. Innovative "Touch" LCD technology.
BrandAeroCool #ad
ManufacturerAeroCool #ad
Height4.3 Inches
Length7.5 Inches
Weight0.4 Pounds
Width2.5 Inches
Part NumberCoolTouch-E
Warranty1 year parts and labor

10. DS leddess


SATA Power Cable,3rd Gen, A D E Series, DS Rainbow RGB Fan LED Sync Controller only for DS Fans with 21key RF Remote

DS leddess #ad - Fan connector of 6 pin, led strip connector of 4 Pin, for LEDdess Fans. For only use with addressable led fans and LED Strip for DS A/D/E Series Fan. The leddess addressable LED ARGB Controller Kit. 21 key rf remote, multiple Modes, Can Adjust Fan Speed. Ds hub box can sync up color to 10 x Fans and 2 x LED Strip Light.
BrandDS leddess #ad
ManufacturerDS leddess #ad
Height0.59 Inches
Length3.94 Inches
Width1.57 Inches
Part NumberDS-ADE03-B