#ad
#ad
Omnipure K2533JJ #ad - This filter also aids in the removal of taste, odor and chlorine taste and odor. Reduces chlorine Taste & Odor. Built-in 1/4 inch quick-connect compression fittings for super easy installation - no tools required. This filter can be used in ice makers, refrigerators, beverage equipment, drinking fountains, under the counter systems, R.

O. Systems and in conjunction with purification systems. Dimensions: 2" w x 10" LFlow Rate:. 5 gpmmaximum pressure: 125 psigmaximum temperature: 100 fservice Life: 1 Year or 1500 Gallons Filtration Media: Granulated Activated Carbon Volume Cubic Inch: 18. 5fitting size: quick-connect 1/4" fittings Omnipure K2533-JJ has been tested for performance under NSF Standard 42.

Omnipure K2533JJ Inline Water Filter with Quick-Connect #ad - . 1, 500 gallon filter capacity. Acid washed GAC inline water filter. The omnipure k-series K2533-JJ filter is a post R. O. This filter has 1/4 quick connect fittings that make it really easy to install and replace.

More information about Omnipure K2533JJ #ad

10" Sediment 5 Micron Filter w/ 1/4"QC Straight Connection

#ad
#ad
Omnipure K2505JJ #ad - Patented collet system allows for quick and easy installation in just a few seconds. This filter is an ideal choice for ice makers, refrigerators and as a post filter for reverse osmosis systems. Quick-connect fittings are molded directly into the filter to reduce the chances of a leaky installation. Manufactured without the use of glues or binders for a smooth, reliable seal.

Do you want better tasting water and ice The K2505-JJ reduces sediment to provide you with better water, pure and simple. The omnipure k2505-jj inline sediment Filter comes with 1/4-inch quick connect fittings and is easy to use and install. Improves the quality of water by reducing dirt, sand, and sediment.

More information about Omnipure K2505JJ #ad


Similar products



Omnipure K2533-KK Chlorine Taste and Odor Filter with 3/8-Inch Quick Connect

#ad
#ad
Omnipure K2533-KK #ad - Maximum pressure: 125 PSIG. The k2533-kk in-line filter is used as a post filter with many different "standard" R. O. The cap and body are spin-welded together producing a smooth, consistent seal without the use of glues or binders that can cause problems. Maximum temperature: 100 F. Systems. The k2533-kk in-line chlorine taste and odor filter features 3/8" Quick-Connect compression fittings that allow for installation and replacement in a matter of seconds without the use of tools.

Omnipure K2533-KK Chlorine Taste and Odor Filter with 3/8-Inch Quick Connect #ad - Manufactured without the use of glues or binders for a smooth, reliable seal. Quick-connect fittings are molded directly into the filter to reduce the chances of a leaky installation. Chlorine Reduction: Class 1. Flow rate:. 5 gpm. The omnipure k2533-kk 3/8" quick-connect fittings are molded directly into the filter body, reducing the chance for LEAKS.

Patented collet system allows for quick and easy installation in just a few seconds. Improves the quality of water by reducing dirt, sand, and sediment.

More information about Omnipure K2533-KK #ad


Similar products



John Guest PPSV040808WP Single Straight Shut-Off Valve, 1/4" Tube OD x 1/4"

#ad
#ad
John Guest Speedfit 738260 #ad - Maximum temperature: 100 F. John guest push-to-connect technology provides a simple, reliable, leak-free connection Manufactured from white polypropylene and equipped with EPDM O-rings. Jg speed fit ppsv040808wp 1/4" x 1/4" od valve start, white the Ppsv Range And Shut-Off Valve Is Offered For Tube Sizes 1/4" O.

D. Suitable for water and food applications, FDA Approved. Maximum pressure: 125 PSIG. Quick-connect fittings are molded directly into the filter to reduce the chances of a leaky installation. Chlorine Reduction: Class 1. Jg speed fit ppsv040808wp 1/4" x 1/4" od valve start, cvpc, white features: designed for hot and cold water and radiant heating systems push fit Fittings Twist And Lock For Added Security No Tools Required Works With Copper, sand, And Pex Pipe Permanent Leak-proof Connection Easy To Install Lead Free 1/4" X 1/4" Od Improves the quality of water by reducing dirt, and sediment.

John Guest PPSV040808WP Single Straight Shut-Off Valve, 1/4" Tube OD x 1/4" #ad - Manufactured without the use of glues or binders for a smooth, reliable seal. And 3/8" O. D. Produced in polypropylene And Fitted Epdm O-Rings. Patented collet system allows for quick and easy installation in just a few seconds. Can be used with plastic or soft copper tubing, Truly demountable without damage to pipe or fitting.

More information about John Guest Speedfit 738260 #ad


Similar products



Filmtec 75 GPD Filmtec Residential RO Membrane

#ad
#ad
Filmtec TW30-1812-75 #ad - 9 liters per Hour Capacity. Lead-free, corrosion free, non-toxic, and more chemically resistant than other plastics Manufactured with FDA compliant materials and NSF 61 and 51 certified. Provides a permanent/removable leak-proof connection, Corrosion free. John guest push-to-connect technology provides a simple, reliable, leak-free connection Manufactured from white polypropylene and equipped with EPDM O-rings.

Filmtec reverse osmosis membrane tW30-1812-75 element is NSF/ANSI Standard 58 listed. Manufactured without the use of glues or binders for a smooth, reliable seal. Filmtec home drinking water elements are rated at 50 psi and will purify about 20% more water than competitive elements rated at 60 psi. Suitable for water and food applications, FDA Approved.

Filmtec 75 GPD Filmtec Residential RO Membrane #ad - 8" x 12" residential RO membrane housings. Nsf/ansi standard 58 listed. Membrane dimensions: 11. The industry's most reliable advanced membrane technology and automated fabrication, allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers and residential customers can rely on.

Because of environmental factors actual production may vary. Advanced membrane technology and automated fabrication in the Filmtec reverse osmosis membrane allow these elements to deliver consistent performance for all customers. Maximum pressure: 125 PSIG.

More information about Filmtec TW30-1812-75 #ad


Similar products



Omnipure K5505JJ 1/4-Inch Quick-Connect Sediment Filter

#ad
#ad
Omnipure K5505JJ #ad - Nsf/ansi standard 58 listed. Patented collet system allows for quick and easy installation in just a few seconds. Chlorine Reduction: Class 1. Max. 1/4" quick-Connect makes installation easy. Suitable for water and food applications, FDA Approved. Maximum temperature: 100 F. Filter Size: 2. 5" diameter x 10" length service life: 1 year maximum in/out Connections: 1/4" Quick Connect Straight Uses: Icemakers, drinking fountains, under-the-counter, refrigerators, beverage equipment, R.

O. 75" overall length, 1. Temp: 100°f flow: Rated at 05 gpm max service life: 1 year Self-Contained Inline filter design requires no filter housing. Note: the tw30 is the new part number printed on the membrane and replaces the BW60, they are identical and the same thing. Great for icemakers, refrigerators, drinking fountains and RO systems.

Omnipure K5505JJ 1/4-Inch Quick-Connect Sediment Filter #ad - Polypropylene depth filtration for great sediment filtration. K5505jj omnipure 10" in-line sediment filter model number: k5505jj Sediment Filtration: 5 Micron Nominal Rating Filter Media Type: Polypropylene depth filtration to remove dirt, sand & sediment. Flow rate:. 5 gpm.

More information about Omnipure K5505JJ #ad


Similar products



Pentek PD-5-934 Polypropylene Filter Cartridge, 9-7/8" x 2-1/2", 5 Microns

#ad
#ad
Pentair Industries PD-1-934 #ad - It has a nominal filtration rating of 5 microns at an efficiency of 85%. It has an initial pressure drop of less than 2 pounds per square inch psi at a flow rate of 2 gallons per minute gpm, and operates over a temperature range of 40 to 175 degrees F 4. 4 to 79. 4 degrees C. This pentek pd-5-934 polypropylene filter cartridge reduces sand, scale, silt, and rust particles in commercial drinking water and industrial fluid applications.

This polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for treatment of commercial drinking water and industrial filtration applications. SpecificationsNominal filtration rating5 micronsInitial pressure drop at 2 gpm.

Pentek PD-5-934 Polypropylene Filter Cartridge, 9-7/8" x 2-1/2", 5 Microns #ad - The filter is made of thermally bonded polypropylene microfibers for resistance to chemicals and bacteria and minimal fiber release.

More information about Pentair Industries PD-1-934 #ad


Similar products



KX Matrikx 32-250-125-975 Chlorine Taste and Odor Filter Cartridge, 10-Inch

#ad
#ad
KX Matrikx 32-250-125-975 #ad - Manufactured without the use of glues or binders for a smooth, reliable seal. Membrane dimensions: 11. 75" diameter fits standard 2" ID Membrane Housings. Initial pressure drop of less than 2 psi at a flow rate of 2 gpm. Polypropylene depth filtration for great sediment filtration. Quick-connect fittings are molded directly into the filter to reduce the chances of a leaky installation.

Maximum pressure: 125 PSIG. Chlorine Reduction: Class 1. Note: the tw30 is the new part number printed on the membrane and replaces the BW60, they are identical and the same thing. Great for icemakers, refrigerators, drinking fountains and RO systems. Lead-free, non-toxic, corrosion free, and more chemically resistant than other plastics Manufactured with FDA compliant materials and NSF 61 and 51 certified.

KX Matrikx 32-250-125-975 Chlorine Taste and Odor Filter Cartridge, 10-Inch #ad - Provides a permanent/removable leak-proof connection, Corrosion free. Flow rate:. 5 gpm. Radial flow outside-to-inside filtration provides increased dirt-holding capacity with low pressure drop. 98% stabilized salt Rejection Minimum Rejection 96%. Matrikx cto filters are the most widely used carbon block devices in the world and provide previously unattainable performance.

More information about KX Matrikx 32-250-125-975 #ad


Similar products



Pentek CBC-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 0.5 Micron

#ad
#ad
Pentair Industries CBC-10 #ad - Suitable for water and food applications, FDA Approved. Membrane dimensions: 11. Quick-connect fittings are molded directly into the filter to reduce the chances of a leaky installation. Patented collet system allows for quick and easy installation in just a few seconds. Manufactured without the use of glues or binders for a smooth, reliable seal.

Water filters are used in a wide range of applications, and irrigation, swimming pools, including drinking water purification, industrial processes, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

Pentek CBC-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 0.5 Micron #ad - Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. 9 liters per Hour Capacity. Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. Temperature range of 40 to 180 degrees F 4.

4 to 82. 2 degrees C. Can be used with plastic or soft copper tubing, Truly demountable without damage to pipe or fitting.

More information about Pentair Industries CBC-10 #ad


Similar products



Dow Filmtec TW30-1812-50 Reverse Osmosis Membrane

#ad
#ad
Dow Filmtec TW30-1812-50 #ad - Color coded molded one-piece gasket and end cap. Nsf/ansi standard 42 and WQA Gold Seal certified. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Membrane dimensions: 11. Shipped dry for convenient and a long shelf life. Improves the quality of water by reducing dirt, sand, and sediment. Initial pressure drop of 3.

7 psi at a flow rate of 2 gpm. Maximum temperature: 100 F. The dow filmtec tw30-1812-50 is a drinking water reverse osmosis element made using advanced technology to ensure consistent performance and quality for all customers. Patented collet system allows for quick and easy installation in just a few seconds.

Dow Filmtec TW30-1812-50 Reverse Osmosis Membrane #ad - Bonded pac media with polyolefin wraps and polyethylene netting. Suitable for water and food applications, FDA Approved. Quick-connect fittings are molded directly into the filter to reduce the chances of a leaky installation. 98% stabilized salt Rejection Minimum Rejection 96%. Manufactured without the use of glues or binders for a smooth, reliable seal.

Nominal filtration rating of 05 micron.

More information about Dow Filmtec TW30-1812-50 #ad


Similar products



FilmTec 50 GPD Membrane For Standard Reverse Osmosis Systems

#ad
#ad
FilmTec TW30181250 #ad - The residual chlorine in municipal or city water will destroy the Thin Film Composite TFC membrane. Improves the quality of water by reducing dirt, sand, and sediment. Maximum pressure: 125 PSIG. 75" diameter fits standard 2" ID Membrane Housings. Nsf/ansi standard 42 and WQA Gold Seal certified. Shipped dry for convenient and a long shelf life.

Film tec reverse osmosis membrane tw30-1812-50 element is NSF/ANSI Standard 58 listed. Nominal filtration rating of 05 micron. The industry's most reliable advanced membrane technology and automated fabrication, allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers and residential customer scan rely on.

FilmTec 50 GPD Membrane For Standard Reverse Osmosis Systems #ad - 75 gallon per day 7. Reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications. Nominal filtration rating of 5 microns. Suitable for water and food applications, FDA Approved. 9 liters per Hour Capacity. Patented collet system allows for quick and easy installation in just a few seconds.

Fits in standard 1.

More information about FilmTec TW30181250 #ad


Similar products